Looking at a apex xtx 2012 anything to look for?exhaust donuts ?

rxwhopper

TY 4 Stroke Guru
Joined
Nov 30, 2003
Messages
865
Reaction score
16
Points
873
Location
REGINA SASK> CANADA
are the exhaust donuts still a issue on the 2012 sleds like the older ones did ? anything to look for at 5200 miles
 
I haven’t had any exhaust donut issues on my ‘12 XTX 12,000 miles... although the known exhaust related problems with the EPS apex’s are that the EXUP cables break and the titanium EXUP header pipe cracks
 
around the 12000 mi mark for when i did them on my 2011 apex. had to do the cables last year. still going strong at 17000 mi.
 
I put Ulmers header in at 13,000 miles. And 3 of 4 flanges cracked and eroded, just gone! Little expensive but with copper donuts, it will likely outlive me lol!
 
I put Ulmers header in at 13,000 miles. And 3 of 4 flanges cracked and eroded, just gone! Little expensive but with copper donuts, it will likely outlive me lol!
notice any power change?
 
Not really but I never asked Ulmer if he had a map for my PowerCommander. Probably something I need to do. I rode it 2 seasons with the power valve disconnected and tied wide open. No noticeable difference in performance until the flanges cracked. Then it popped and banged all the time.
 
When I swapped out my EXUP for Ulmer’s header he sent me a new map for my PCV. He added a little bit of fuel back into the mid range and up top as well. I had to add a little weight to my Supertips........def makes a little more power.
 
Weeeeelll , guess I better make a phone call!
 


Back
Top