Looking for info for more power for my 2007 turbo phazer.

Mad Cat

Extreme
Joined
Jan 11, 2007
Messages
56
Reaction score
0
Points
286
Location
Newfoundland
I have a 2007 MCX Turbo Phazer mtn lite not much else done after the turbo,will except for replacing the grey side panels for black and making a new windscreen out of a cat flyscreen.It is used at sealevel and really rips at 140/145 hp at 12psi on 92 pump gas think,does anyone know if i could turn up the boost to lets say 16/18/20 psi and run race gas c12/c14 or what ever is best for 660 and 1000 foot drags and how much hp can i get out of it I would then put it back to 12 for everday riding ,jumping,trailbanging and some climbing/ boondocking which dont get to high here on the east coast of Newfoundland.Any help or info or point me in some direction on someone who can help with more power for those drags would be great so i can lay some smack on those 2 stroke improved 500/600/700s,I also have a boondocker nos kit if that would work with the turbo?Actually i purchased it with 400kms on it and i put 400 more on it,from gsxr on here built and ready to go and that is as much as i know about the sled,here is a couple of pics of the sled
:yam: .
Picture140316.jpg

Picture140326.jpg

Picture140331.jpg

Picture140332.jpg

Phazerturbosledpics00113.jpg

Thanks Roger
 
you might find E85 to be easier to come by than race fuel. I think its about 110 octane. however winter E85 is closer to E70 so might be a bit lower.

you will also need to make sure the fuel system is up to ethanol and get larger injectors.

I hear E85 isn't the greatest for cold starting (the reason for the E70 thing).
 
The guy's out west are running c12 , without the head shim at 20lbs !!!

Not sure that I would ??? without shim, but probally ok with !
 
rideblue said:
Move the air filter out from under the seat for more consistant performance.

I was thinking about doing that,did you find it alot better than the way mine is and where did you get the stuff to do it and or could you shoot me some closer pics of what you got done at rackerman@personainternet.com.
thanks roger
 
gsxr said:
The guy's out west are running c12 , without the head shim at 20lbs !!!

Not sure that I would ??? without shim, but probally ok with !

Hey Glen do you have the shim in mine and do you have the install manual?
Thanks
 


Back
Top