dexter
TY 4 Stroke Master
anyone put a second set of wheels in the rear of the venture skid? I see the hyfax wears on my sled more to the last 1/4 of the suspension and there is tons of room for a set on the outside or inside of the rails. I have an old set of mounting blocks from the yami small wheel kit but dont know if they will work. thoughts??
Mooseman
I'm not all knowing. Post your question in forum.
- Joined
- Nov 3, 2009
- Messages
- 4,041
- Reaction score
- 1,049
- Points
- 1,733
- Location
- Greely, Ontario
- Country
- Canada
- Snowmobile
- '07 Venture MP (gone)
'07 Phazer FX (gone)
'09 Phazer GT (gone)
'10 RS Venture GT (My current ride)
'10 Nytro FX (son's)
- LOCATION
- Greely, ON Canada
They would work but I would recommend 135mm wheels with Doo mounts. Check out this thread which explains what I did on my Venture MP:
http://www.ty4stroke.com/viewtopic.php?t=79773&highlight=
The 135's would last longer than those small wheels. If you're adding even more wheels than that, check for clearance with the suspension completely compressed.
http://www.ty4stroke.com/viewtopic.php?t=79773&highlight=
The 135's would last longer than those small wheels. If you're adding even more wheels than that, check for clearance with the suspension completely compressed.
