Da Yammie
Extreme
Wondering about getting an MBRP exhaust for my 08 RTX. When I looked at the exhaust system it looks like you have to cut and weld on the new one. I was talking to my uncle last night and he told me he has heard the aftermarket exhaust's are slip on's and all that needs to be done is cut off the existing pipe and the new one slides over the old one no welding needed. Are all the aftermarket mufflers like this or do you have to weld on the new one?
canoehead
TY 4 Stroke God
- Joined
- Jan 14, 2011
- Messages
- 2,134
- Location
- NE, Alberta
- Country
- Canada
- Snowmobile
- 2014 XF9000, 2016 Viper XTX
I believe most are a "slip on" can. Depending on OD the MBRP can should slip over and be clamped.
Devin yamaha man
Pro
- Joined
- Jun 8, 2014
- Messages
- 183
- Age
- 28
- Country
- Canada
- Snowmobile
- 2007 Phazer fx
136"
MBRP exhaust
Yamaha GYTR front shocks
my mbrp had to be wielded cause I purchased it used....It took 10 min to cut off the stock and weld on the mbrp sounds great and made the phazer snappy as hell.
MikeWalters
TY 4 Stroke Master
The only one that is not a "cut factory piping" is the full Hindle system...that is or is not available, and information and dyno sheet is or is not available...LOL
Devin yamaha man
Pro
- Joined
- Jun 8, 2014
- Messages
- 183
- Age
- 28
- Country
- Canada
- Snowmobile
- 2007 Phazer fx
136"
MBRP exhaust
Yamaha GYTR front shocks
Go with mbrp. You'll love the sound and the power. I've trailed with the mbrp for a year now and no sound tickets. Although it's so loud my buddy's can't even hear they're own machines when we ride.
porkchop
TY 4 Stroke Master
When I bought my Phazer it had an MBRP on it, cool for the first couple of weekends then it just became to obnoxiously loud.
When you can hear that "barking" out the back louder than the iPod in your ears, it wasn't for me.
After going back to stock it actually had a better feel power wise, better back pressure with no popping on decel.
My pipe was just cut shorter so a $4 NAPA coupler / 2 clamps did the fix, stock went right on.
When you can hear that "barking" out the back louder than the iPod in your ears, it wasn't for me.
After going back to stock it actually had a better feel power wise, better back pressure with no popping on decel.
My pipe was just cut shorter so a $4 NAPA coupler / 2 clamps did the fix, stock went right on.
Devin yamaha man
Pro
- Joined
- Jun 8, 2014
- Messages
- 183
- Age
- 28
- Country
- Canada
- Snowmobile
- 2007 Phazer fx
136"
MBRP exhaust
Yamaha GYTR front shocks
I put 2 baffolds in my pipe to quiet it down..its good torque sound now, porkchop did your pipe have any small backfires when using the engine breaking on the phazer?
porkchop
TY 4 Stroke Master
Yeah, that was the popping on decel-
Was really just more noticeable over stock.
Was really just more noticeable over stock.
Devin yamaha man
Pro
- Joined
- Jun 8, 2014
- Messages
- 183
- Age
- 28
- Country
- Canada
- Snowmobile
- 2007 Phazer fx
136"
MBRP exhaust
Yamaha GYTR front shocks
Forsure...its the loudest at full throttle, it really roars lol...my buddy can hear it from his house3 km down the road from my field
MikeWalters
TY 4 Stroke Master
I have never had any decel pop or backfires, but am using the PCIII fuel controller which I assume corrects this.
Last edited:
RoicIND
Expert
I have a MBRP slip on if you're interested. It is a clamp type slip on.
Phazer2Viper
Extreme
- Joined
- Apr 14, 2014
- Messages
- 105
- Location
- Slinger, WI/ Three Lakes, WI
- Country
- USA
- Snowmobile
- 2015 Viper LTX-DX 15,000 miles and counting!
2008 Phazer GT 128" track 10,444 miles (sold)
2008 Nytro RTX 136" 3800 miles (sold)
2000 Phazer 6500 Miles (Sold)
1990 Phazer II 10,000 miles (sold)
Great. i just put one on mine and you guys are saying ill go deaf.
3-UP
Extreme
Great. i just put one on mine and you guys are saying ill go deaf.
Guaranteed
canoehead
TY 4 Stroke God
- Joined
- Jan 14, 2011
- Messages
- 2,134
- Location
- NE, Alberta
- Country
- Canada
- Snowmobile
- 2014 XF9000, 2016 Viper XTX
If you think it's loud on a Phazer you should hear my Nytro!
Da Yammie
Extreme
Going to order one once they are back in stock thanks for confirming it guys. Here is a video of a guy I met last year that has a mbrp on his nytro also has a power commander. Craziest 4 stroke I ever heard!!!
https://www.youtube.com/watch?v=lHSwL__1v7s&list=UUi7_NUrmQxOHhSWXwCNMROA
https://www.youtube.com/watch?v=lHSwL__1v7s&list=UUi7_NUrmQxOHhSWXwCNMROA
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.