yamadog07
Expert
i am looking to replace my stock attak windshield with the yamaha mid windshield.
i understand this is a little higher across the total width of windshield (and still looks good too !)
i assume this makes things a little warmer on the hands,
just wondering if this helps deflect more wind from chest & helemet ?
any of you guys tried it ?
i understand this is a little higher across the total width of windshield (and still looks good too !)
i assume this makes things a little warmer on the hands,
just wondering if this helps deflect more wind from chest & helemet ?
any of you guys tried it ?
timc
Extreme
I have one coming. I hope it is at least as good as stock. I tried a tall with the stupid rods and broke it as soon as I closed the cover on my trailer. Just as well. It looked awful! I have the mid. tint to black with strobes coming.
TimC
TimC
vmaxcrazy
Pro
I have one on my attak. I'm 6'0 when sitting the wind hits me just above the shield on my helmet. Verry little on the hands as long as I don't hang on the tips of my handle bars. A BIG improvement over stock and like you said, looks good too.
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,986
- Reaction score
- 6,324
- Points
- 1,733
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
Yes, mid-height is far better than a stock Attak windscreen. I have put them on all my Attaks. The stock shield is worthless for trailriding.
trailmarker
Extreme
I second what vmaxcrazy said !, well worth it
Daranello
Suspended
are you guys talking about the the low windsheild that came in 2006 or the standard windsheid that came with the attaks in 07
timc
Extreme
Replacing the standard '07 Attak WS with a Yamaha mid height. Both are called "mid height" but the replacement has a different shape than the original. Maybe more wind protection and gets rid of the overdone (in my opinion) graphics.
TimC.
TimC.
Daranello
Suspended
timc
Extreme
That looks taller than either one to me. I am putting on SMA-8FT96-22-BK from Yamaha's website under "accessories".
TimC.
TimC.
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,986
- Reaction score
- 6,324
- Points
- 1,733
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
Attaks never had a good windscreen. Not in 06 and not in 07. Daranellos picture appears to be the mid-height shield from accessories.
Daranello
Suspended
KnappAttack said:Attaks never had a good windscreen. Not in 06 and not in 07. Daranellos picture appears to be the mid-height shield from accessories.
So is that the good one you guys are talking about???
CaptCaper
VIP Member
- Joined
- Jan 1, 2007
- Messages
- 2,307
- Reaction score
- 203
- Points
- 1,383
- Location
- Northern N.H.
- Country
- USA
- Snowmobile
- 2016 RS Vector XTX 1.25 Lug wifes..2013 RS Vector LTX.. 2003 600 VMax Past Machines 3-2007 Attaks 1-2010 Vector LTX.. sorry no Stinkdoos or poo's cats.
I had mine replaced with the Med. Height Accessory one from Yamis book.
It blocks the wind except at the top of the sheild which is fine with me..
I like it.
It blocks the wind except at the top of the sheild which is fine with me..
I like it.
yamadog07
Expert
Sma-8ft96-
The "-21" is clear w/black on the bottom.
The "-22" is tinted(smoke) w/black on the bottom.
and i have been told by my yamaha rep these are the mid "higher" ones.
the stock is a -20
The "-21" is clear w/black on the bottom.
The "-22" is tinted(smoke) w/black on the bottom.
and i have been told by my yamaha rep these are the mid "higher" ones.
the stock is a -20
attak-d
Pro
- Joined
- Sep 20, 2006
- Messages
- 142
- Reaction score
- 0
- Points
- 796
- Location
- North Freedom,WI and Iron Belt,WI
Buy one it helps.
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.