• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Mono Shock Adjuster Tool...alternative to cable replacement NOW IN STOCK

hibshman25

hibshman25

Vendor
Joined
Sep 25, 2005
Messages
2,865
Age
40
Location
Lebanon, PA 17042
Country
USA
Snowmobile
2017 sidewinder ltx dx
2018 snoscoot
For those that gave up on replacing the the mono shock adjustment cables we have designed a small tool which allows for easy shock adjustment.

To utilize the tool, the shock eyelet must be rotated 180 degrees so the port is facing downward.

Tool is stainless steel and will come on a key chain which indicates which direction to turn for harder or softer setting.

Also included will be a rubber cap to install over top of the fitting when not being adjusted.

Sell Price is $35


shock adjuster.jpg
image.jpg
image.jpg
 
Last edited:

I need 2 of these... every year the cables are broke. How much? You should also make a blank off panel to just remove the adjuster.
 
Last edited:
MrSled said:
I need 2 of these... every year the cables is broke. How much? You should also make a blank off panel to just remove the adjuster.
Click to expand...

Still waiting on pricing back from laser fab shop. Will certainly be cheaper than a new cable. Thinking around $35 retail.

Will work on drawing up a block of plate and get some pricing on them too. If there's enough of interest in them I will get a batch made.
 
Travis just spent $47 cable re placement that just small part done it three time
 
Travis sent me 1 this winter, works well, but I need the cap for. Covering shock tip.
TRAVIS did you find me a 13mm sway bar yet RX1, Larry
 
BigDogrx1 said:
Travis sent me 1 this winter, works well, but I need the cap for. Covering shock tip.
TRAVIS did you find me a 13mm sway bar yet RX1, Larry
Click to expand...

Hey Larry. Got 4 sleds in last week. If one of them has a 13mm you will be first to know!

Your shock adjust tool was one of the early prototypes. Once we get the final version complete I will send one out for you with the cap.
 
hibshman25 said:
Hey Larry. Got 4 sleds in last week. If one of them has a 13mm you will be first to know!

Your shock adjust tool was one of the early prototypes. Once we get the final version complete I will send one out for you with the cap.
Click to expand...
Travis thanks so much (I appreciate your help), just wanted guys to know tool works great, will hope ya have a 13, Larry
 
Shock adjuster tools are in stock. Will be selling for $35. Still working on block off plates.
image.jpg
 
Block off plates are now in stock. The plate will mount on inside of tunnel using the 3 ra adjuster mounting bolts. The plate comes with flanged lock nuts. We are including the plate and nuts with the adjuster tool as a kit. We will also sell the block off separate.
image.jpg
 
I would like 2 kits with plank offs... can you set me up?? I can run your logo on my asphalt sled if you send me 2 stickers with it :)
 
viper7mi said:
Anyone have a extra key?
Click to expand...
Do you know kimpex makes a knob for the adjuster now that screws onto the shock&stays there, you can just turn in or out to adjust
 
You must log in or register to reply here.


Back
Top