Tod
Lifetime Member
On my 06 Attak and my friends 06 RTX it seems as if the rebound dampening is not right. Push down on it and it seems to spring back up a hell of allot more than my 97 700SX and our other friends RX1. It seems fine on the trail but play with it in the garage and it seems to rebound with not much dampening.
I know there have been issues with the Ohlin shock but what about the shock in the Attak or RTX??
Thanks,
Tod
I know there have been issues with the Ohlin shock but what about the shock in the Attak or RTX??
Thanks,
Tod
boat.man
Extreme
the dial on the tunnel controls rebound as well as compression dampening, so if it is set to soft you will have almost no rebound dampening.
Tod
Lifetime Member
not sure where my dial was at.
Tod
Tod
I'm having the same problem. Sag and preload are set right. Compression seems fine, but rebound damping needs to be slower yet. I'm set at the stiffest setting on the dial, but I get the pogo stick rebound on bumps.
Mikecam
TY 4 Stroke Junkie
The shock could be gone. Can't see the dial being both rebound and compression. If you stand on the back bumper and you can get the sled to pogo then something is wrong. When pushing down hard the shock should come up real slow.
I also thought the valving was for compression only. Mine doesn't pogo sitting still; but on the trail I'd like to stiffen the rebound damping.
Fergie
Expert
mine is also no good, I pulled the boot back & noticed that the cable was BROKE so i will start there. only 1500 miles, I hope the shock is not blown allready. $35.00 for cable. I'm hoping when it's broke that it goes to the softest setting & maybe that will explain my bottoming
Bottoming is more a result of spring preload or the right spring rather than the compression settings.
i have my shock on the 3rd clip the spring preload on 5 and turn the RA on max and it will stilL bottom to easy goona have to get stiffer spring in the summer
I'm 260 lbs before gear. Got the big boy spring. 1st ring clip, 3rd detent on the preload adjuster gives me the 40 mm sag. I still bottom sometimes, but my understanding is you should bottom out sometimes.
zipclean
Expert
I find the longer I ride the more ice builds up under the back of the Attak and the more it bottoms out because of the extra weight.Maybe a rear cooler would fix that.Hard to believe that some one really tested these sleds before sending them out on SNOW!
Yamaholic22
Pro
the RA adjuster is for compression and rebound adjustment, and it affects the rebound much more than the compression adjustment. This is a common misconception with this suspension, but that is how it really is.
Mikecam
TY 4 Stroke Junkie
GT's are electric and are Compression only. Rebound adj. is on the shock itself.
Bigmax
Veteran
Sorry guys, that big boy spring isn't going to cut it and isn't the answer. The shock needs some serious work. Stiffening up the spring may help keep it from bottoming but then when you do compress it the rebound will about throw you over the front. Mine bottomed all weekend and I have my preload all the way up and the adjuster on the tunnel on full hard. And NO, the cable isn't broke because when I turn it back softer you can tell a huge difference.
Similar threads
- Replies
- 1
- Views
- 413
- Replies
- 8
- Views
- 598
- Replies
- 7
- Views
- 695
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.