sheetwright
Northwoods Snowmobiling Facebook
Thanks for helping with the question guys, and helping with the Mod's on my sled!
The Summer changes are on my next post. Thanks, guys
The Summer changes are on my next post. Thanks, guys
towerrigger
TY 4 Stroke Junkie
I may have missed your post in the past sheet but what did you have done to the motor?
sheetwright
Northwoods Snowmobiling Facebook
Summer list
Here is the engine list:
Ordered and installed a stroked and dynoed Nytro engine.
Clutch kit
K&N filters
Exhaust header pipes
Silencer
Fuel programmer
Power sheeves
Gearing changed only 1-tooth (to change)
Added extra heat exchanger, and tunnel guards
Suspension changes to date:
Added muffinworks resevoirs to the front Fox Shocks, mounted inside
Had all four shocks revalved
Added the fat boy spring to the back front shock
Turned down the upper balljoint shoulder 2mm
Added ulmer oillite bushings to the a-arms
Added the adjustable rear suspension block from Hauk
C&A Pro Series Razor ski's with blue loops
Picked the track to 144 1.450
Added two more wheel kits to the track
Added two rear fat boy springs to the rear of the track
Removed the FOx floats. Couldn't stand them. Added GYT dual clickers
Other changes to date (body etc.)
Blue medium windshield with clear side deflectors
Front skid plate
3" of rise on the handle bars
Handle bar Yamaha pad
Blue rear trunk bag
Blue Tank bag
Billet cap for tank
New Black trail tank installed
Powder coated the front grab bar, and a-arms white
Powder coated the rear bumper white
Powder coated the tunnel support plates, and foot well bars blue
Added blue led lights under the tunnel, above the a-arms, and in the exhaust tunnel
Changed the decals and stickers.
Fox shock guards
A-arm guard plates
New aluminum 09 clutch splash guard plate installed,
New Blue, cushioned, oversized, FX Nytro hand guard covers
Garmin 60CSX mounted to the left on the handle bars between the pad and the brake. Hard wired to the motor with a seperate fuse
Added connection for face shield on helmet
New rear blue Yamaha flap
Polished tunnel
Changed the hyfax slides to blue
Changed the mid and rear bogie wheels to the Slydog, black, blue, and white open style
Added the aluminum front sport grab bar
Added Racing decal package from Arctic FX
I have to go boys. Heading up north hunting. I will post the pics on Sunday. Thanks for the interest, and help with the ideas to get the summer project going. Only change saving up for once I get used to this setup will possibly be boost . Couldn't of done it without a lot of help from the site. Wow so much in 4-1/2 months.
PICS ARE COMING
GOT RID OF THE 150 THE SIDE. Why keep a tacky number on that keeps changing
Here is the new summer list. All done since June of this year!towerrigger said:I may have missed your post in the past sheet but what did you have done to the motor?
Here is the engine list:
Ordered and installed a stroked and dynoed Nytro engine.
Clutch kit
K&N filters
Exhaust header pipes
Silencer
Fuel programmer
Power sheeves
Gearing changed only 1-tooth (to change)
Added extra heat exchanger, and tunnel guards
Suspension changes to date:
Added muffinworks resevoirs to the front Fox Shocks, mounted inside
Had all four shocks revalved
Added the fat boy spring to the back front shock
Turned down the upper balljoint shoulder 2mm
Added ulmer oillite bushings to the a-arms
Added the adjustable rear suspension block from Hauk
C&A Pro Series Razor ski's with blue loops
Picked the track to 144 1.450
Added two more wheel kits to the track
Added two rear fat boy springs to the rear of the track
Removed the FOx floats. Couldn't stand them. Added GYT dual clickers
Other changes to date (body etc.)
Blue medium windshield with clear side deflectors
Front skid plate
3" of rise on the handle bars
Handle bar Yamaha pad
Blue rear trunk bag
Blue Tank bag
Billet cap for tank
New Black trail tank installed
Powder coated the front grab bar, and a-arms white
Powder coated the rear bumper white
Powder coated the tunnel support plates, and foot well bars blue
Added blue led lights under the tunnel, above the a-arms, and in the exhaust tunnel
Changed the decals and stickers.
Fox shock guards
A-arm guard plates
New aluminum 09 clutch splash guard plate installed,
New Blue, cushioned, oversized, FX Nytro hand guard covers
Garmin 60CSX mounted to the left on the handle bars between the pad and the brake. Hard wired to the motor with a seperate fuse
Added connection for face shield on helmet
New rear blue Yamaha flap
Polished tunnel
Changed the hyfax slides to blue
Changed the mid and rear bogie wheels to the Slydog, black, blue, and white open style
Added the aluminum front sport grab bar
Added Racing decal package from Arctic FX
I have to go boys. Heading up north hunting. I will post the pics on Sunday. Thanks for the interest, and help with the ideas to get the summer project going. Only change saving up for once I get used to this setup will possibly be boost . Couldn't of done it without a lot of help from the site. Wow so much in 4-1/2 months.
PICS ARE COMING
GOT RID OF THE 150 THE SIDE. Why keep a tacky number on that keeps changing
lucky_7
TY 4 Stroke Guru
DC5
TY 4 Stroke Junkie
Where did you get the stroked Nytro motor from and who did the Dyno on it?
sheetwright
Northwoods Snowmobiling Facebook
lucky_7 said:
Had a couple of problems when I dropped it off this weekend, to have the dealer complete the list. I will post the pics once I get the sled back together. The Problems I will post on a new thread. Sorry no pic's til the sled is together.
sheetwright
Northwoods Snowmobiling Facebook
DC5 said:Where did you get the stroked Nytro motor from and who did the Dyno on it?
Somebody most of you don't care for . I had Pat Hauk build it for me. I saw the dyno, and the results this weekend, But do to some issues (not the dealers fault.)like I said; I won't have the sled til this weekend. I will post the dyno with the pics of the sled and mod's. Thanks for the interest guys.
sheetwright
Northwoods Snowmobiling Facebook
Pic's
Here you go! I will have cleaner pic's if it ever stops raining. I will also include the pics of the engine, and suspension changes, that can be seen. Here are a few more changes I made to the list:
White plastic hand guards
White canvas Nytro oversized guards
Rox riser
Two more LED strips
Aluminum flashings, and guards around LED lights
Engine is at 166HP 1153CC to date with stroker
lucky_7 said:
Here you go! I will have cleaner pic's if it ever stops raining. I will also include the pics of the engine, and suspension changes, that can be seen. Here are a few more changes I made to the list:
White plastic hand guards
White canvas Nytro oversized guards
Rox riser
Two more LED strips
Aluminum flashings, and guards around LED lights
Engine is at 166HP 1153CC to date with stroker
Attachments
sheetwright
Northwoods Snowmobiling Facebook
sheetwright
Northwoods Snowmobiling Facebook
sheetwright
Northwoods Snowmobiling Facebook
sheetwright
Northwoods Snowmobiling Facebook
sheetwright
Northwoods Snowmobiling Facebook
Follow up
Well looks like we have an 08 thread going at the same time as an 09 thread now. Once again thanks for the help guys
Well looks like we have an 08 thread going at the same time as an 09 thread now. Once again thanks for the help guys
sled-freak
Extreme
wow.....sweet looking ride..you got a lot of dough into that thing...enjoy!
sheetwright
Northwoods Snowmobiling Facebook
sled-freak said:wow.....sweet looking ride..you got a lot of dough into that thing...enjoy!
Thank you. Can't wait for the snow.
Similar threads
- Replies
- 0
- Views
- 1K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.