TLM
Extreme
- Joined
- Jul 19, 2014
- Messages
- 87
- Reaction score
- 7
- Points
- 338
- Location
- Hortonville, WI
- Country
- USA
- Snowmobile
- 2012 Nytro xtx, oft relocate, oilite bushings, comfort clutch, tunnel block, tailight relocate, cr10EK plugs, copper donuts, tuner skis, Grizz Tracks gusset kit. Excell x wheels. Mo-Flow console vent and curved vents.
Just wondering what a guy has to do to remove/replace the front inner idlers on a nytro xtx....im thinking you have to remove the front shock from the top mount, I took all of the preload off of the spring. The skid is on the sled yet..
Im adding 4 "X" wheels to the rails. I already have 4 ski doo 135 mm wheels in the stock locations on the outer rails. Im adding a pair behind the torsion spring mounts and the stock location inside the rails in line with the front shock....any insight or direction would be greatly appreciated.....
Im adding 4 "X" wheels to the rails. I already have 4 ski doo 135 mm wheels in the stock locations on the outer rails. Im adding a pair behind the torsion spring mounts and the stock location inside the rails in line with the front shock....any insight or direction would be greatly appreciated.....
sloan188
Expert
- Joined
- Nov 28, 2012
- Messages
- 255
- Reaction score
- 21
- Points
- 323
- Location
- Vaudreuil, QC
- Country
- Canada
- Snowmobile
- 2005 Polaris Fusion 900
2009 Nytro XTX
2010 Ski Doo GSX LE 1200
when I did mine, I just unbolted the axle and used a pry bar to compress the shock/pry the axle out of the skid...then simply pulled the wheel off and changed it.
TLM
Extreme
- Joined
- Jul 19, 2014
- Messages
- 87
- Reaction score
- 7
- Points
- 338
- Location
- Hortonville, WI
- Country
- USA
- Snowmobile
- 2012 Nytro xtx, oft relocate, oilite bushings, comfort clutch, tunnel block, tailight relocate, cr10EK plugs, copper donuts, tuner skis, Grizz Tracks gusset kit. Excell x wheels. Mo-Flow console vent and curved vents.
After I looked at it a little bit, thats what I ended up doing. Taking the pre load off the spring helped too. Thanks for the info!
