wheeline
Extreme
- Joined
- Jun 27, 2006
- Messages
- 104
- Reaction score
- 0
- Points
- 376
I am currently running a Malpassi 1:1 rising rate fuel regulator on an RX-1 with boondocker 28rs kit. These regulators are junk. Traditionally you set idle at 5psi then it increases with boost. I have replaced it twice and a friend has done the same on his sled. Is it the spring or diaphragm that goes bad? Everything works great when they are new. After a few months they stop responding correctly to boost pressure. What are all you RX-1 guys using for a regulator?
Thanks!
Thanks!
givemeaboost
TY 4 Stroke Junkie
- Joined
- Dec 5, 2003
- Messages
- 689
- Reaction score
- 24
- Points
- 1,028
- Location
- Great Falls, MT.
- Country
- USA
- Snowmobile
- 03 Rx1 Turbo
- LOCATION
- Great Falls,MT
This is what I've been using for three years now.Ken... http://turboaddictionparts.com/catalog/ ... cts_id=258
Zipperno
Extreme
- Joined
- Mar 4, 2008
- Messages
- 80
- Reaction score
- 0
- Points
- 216
A Malpassi 1:1 regulator is linear. Not rising rate...
Mallory also makes quality carb regulators....but as mentioned Aeromotive is top notch!
Mallory also makes quality carb regulators....but as mentioned Aeromotive is top notch!
Ski-Dooin' it
Expert
I run a mallory one.. works great. and good price to boot. there like $100 from summitracing, tons of inlet/outlet options.
t_thall
Extreme
aeromotive compact universal 1:1
wheeline
Extreme
- Joined
- Jun 27, 2006
- Messages
- 104
- Reaction score
- 0
- Points
- 376
Thanks for the comments. Just ordered the aeromotive universal bypass regulator from Ted.


mulot30th
Lifetime Member
- Joined
- Jul 7, 2007
- Messages
- 1,634
- Reaction score
- 2
- Points
- 1,073
- Website
- youtube.com
- Country
- Canada
- Snowmobile
- 2023 thundercat
apex mountain crracing 174
apex blower 136 for asphalt racing
osp drag race sled (apex engine based)
I like the aeromotive
Similar threads
- Replies
- 12
- Views
- 4K
- Replies
- 6
- Views
- 2K
- Replies
- 7
- Views
- 2K
- Replies
- 2
- Views
- 1K