New Nytro owner - what are the "must do's"

[tonykof]

Worked a trade out with a guy last spring for my 05 CPR turbo Warrior. I'm now the owner of a 2008 Nytro RTX extended to 144" with about 3000 miles

Anyway...I'm curious what things may need attention now that these have been wrung out for a few years. It has scratchers so that should help with the hyfax wearing issuses...other than that & the track I believe the sled is pretty much stock.
Thanks tk

 

[Grimm]

Skis, exhaust donuts, oilite bushings for suspension, Yamaheater, and if you can swing it, an OFT steering relocator.

Use the search function on this site, as these items have been discussed hundreds of times before and the info is all here.

 

[natedawgedog]

dont forget roest skid plate and a ROV too!

and since your used to it already (and I know you will miss it) boost!

 

[603NytroXTX]

There is a thread on here somewhere that has a list of all the "problems" of the nytro and the common fixes and products that help with them. I dont remember where it was thought but im sure someone here knows what im talking about. Good luck!

 

[Eagle1]

Pray for snow.

 

[raginyamaha]

http://ty4stroke.com/viewtopic.php?t=58910 start here, so much info on everything. Ride the sled and find out what you like and dont like then mod from there...

 

[tonykof]

Skis, exhaust donuts, oilite bushings for suspension, Yamaheater, and if you can swing it, an OFT steering relocator.

Use the search function on this site, as these items have been discussed hundreds of times before and the info is all here.

Thanks, I'm a newbee to the FX Nytro, not the site...The search feature on here is terrible... :exc:

Besides as years go by the "problems/fixes/preventive steps" seem to change so I thought I'd get a fresh view...

Oh, and I'm lazy

 

[kopenytro]

stuff to what for

ski spindle bushings, tie rod ends, jack shaft bearing are just some additional items to name a few.

Good luck!

Kope

 

[tonykof]

There is a thread on here somewhere that has a list of all the "problems" of the nytro and the common fixes and products that help with them. I dont remember where it was thought but im sure someone here knows what im talking about. Good luck!

This would be perfect!

Unfortunately... I can't find it...

 

[tonykof]

Re: stuff to what for

ski spindle bushings, tie rod ends, jack shaft bearing are just some additional items to name a few.

Good luck!

Kope

Sounds like a lot of the same problems as the RX1's...

 

[Grimm]

http://ty4stroke.com/viewtopic.php?t=58910

 

[tonykof]

http://ty4stroke.com/viewtopic.php?t=58910

Opps...I actually did see that one...I kept searching for "problems" fixes & known issues..
Thanks,
I'll get to reading

 

[arteeex]

Ride it.

 

[tonykof]

Ride it.

 

[revster]

I think the "must do's" depend on your usage. For example if you ride off trail I would put a Roest skid plate and a ROV at the top of the list. If you are a trail rider then those two items aren't as important. Some guys wouldn't go without the Yamaheaters and none of the guys in our group have them or plan to get them. I agree with arteex, ride it and see what you don't like about it.