A
Anonymous
NYTRO SUPERCHARGER COLD AIR INTAKE
MPI’s newest add on for the FX-Nytro Supercharger Kit. Works on all 2008+ Nytro models, including MTX, RT, RTX, XTX.
High Performance MPI Nytro Cold Air Supercharger Intake fits conveniently under the hood. In extreme circumstances the unit may be routed through the hood, but testing has shown that simply rerouting the intake to the protected area over the clutches is sufficient to provide good clean dry cold air. The kit is easy to install, but does require that you remove your intercooler to access the supercharger inlet. A template is included to drill a hole in the left side bulkhead (testing shows no effect to structural rigidity of the bulkhead. Includes Fabricated mandrel bent 2.5" aluminum air tube, new filter and all hardware required for installation.
FEATURES:
- 100% 6061 Aluminum Construction
- Complete Unit Weighs less than 1 pound
- New Mesh Filter included
- Testing shows this kit ADDS 1 TO 2 POUNDS OF BOOST when working the unit hard.
- 100% TIG Welded
- Increased Air Flow
$129.99, if you have anymore questios about this product or any other product that we sell please contact me at 888-649-4609 ext 121 Thanks Skyler
MPI’s newest add on for the FX-Nytro Supercharger Kit. Works on all 2008+ Nytro models, including MTX, RT, RTX, XTX.
High Performance MPI Nytro Cold Air Supercharger Intake fits conveniently under the hood. In extreme circumstances the unit may be routed through the hood, but testing has shown that simply rerouting the intake to the protected area over the clutches is sufficient to provide good clean dry cold air. The kit is easy to install, but does require that you remove your intercooler to access the supercharger inlet. A template is included to drill a hole in the left side bulkhead (testing shows no effect to structural rigidity of the bulkhead. Includes Fabricated mandrel bent 2.5" aluminum air tube, new filter and all hardware required for installation.
FEATURES:
- 100% 6061 Aluminum Construction
- Complete Unit Weighs less than 1 pound
- New Mesh Filter included
- Testing shows this kit ADDS 1 TO 2 POUNDS OF BOOST when working the unit hard.
- 100% TIG Welded
- Increased Air Flow
$129.99, if you have anymore questios about this product or any other product that we sell please contact me at 888-649-4609 ext 121 Thanks Skyler
racinstation
Extreme
pics?
Skydog
TY 4 Stroke God
Yea i like that!!! I will take one! You guys rock!! 
Thanks Skyler
Matt/Skydog
Thanks Skyler
Matt/Skydog
TurboJamie
TY 4 Stroke God
How much do the 2 holes for the SC and air filter weaken the CF diecast frame?
Skydog
TY 4 Stroke God
testing shows no effect to structural rigidity of the bulkhead.
A
Anonymous
Thats correct. We have been testing this set up for quite some time with 0 failures. Thanks Skyler 888-649-4609 ext 121Skydog said:
