OFT Racing - Billet / Oilite Steering bushings

[tapex_07]

So does this still work with the Wild Child relocation? Or can you make yours rider forward? thanks!

 

[mtdream]

I took the wildchild off to put this on...

It is a LOT cleaner install, and MUCH easier on steering!!!

 

[scmurs]

So does this still work with the Wild Child relocation? Or can you make yours rider forward? thanks!

Tapex,

What model sled do you have?

There are a couple of discussions going on in this thread. One is for our Nytro rider-forward relocator kit and the other is for our direct replacement steering blocks for the Apex, RX, RS and Nytro chassis sleds.

Let me know which sled you own and I can answer your question.

Scott

 

[tapex_07]

Looking for the relocation kit for the Nytro, and blocks for the Phazer. Thanks!

 

[scmurs]

Looking for the relocation kit for the Nytro, and blocks for the Phazer. Thanks!

Tapex,

The thread about the relocator for the Nytro is here:

http://www.ty4stroke.com/viewtopic.php? ... hlight=oft

There are a number of posts in this thread from guys who have the relocator even though this thread was originally talking about the billet steering blocks.

The Phazer steering post has one of the OEM plastic bushings on the top of the shaft and a aluminum block/steel roller bearing for the bottom mount. Our billet/oilite block will replace the upper stock plastic one on the Phazer. I forgot to mention that in my last post.

Hope I answered all of your questions. If not, pm me or give me a call at 952.465.7399

Scott

 

[mud99]

I'm impressed with these bushings they are really nice and light and precise, and will probably last forever, and they shipped out very quickly...

Mark

 

[doo_man]

I am impressed with the service.....ordered mine online last night and got the shipping info this morning! Impressive!

 

[TurboVector]

Installed these bushings on my '05 Vector and the steering feels like it's brand new! HIGHLY RECOMMENDED along with great service!

 

[birkebeiner]

Installed these bushings on my '05 Vector and the steering feels like it's brand new! HIGHLY RECOMMENDED along with great service!

How many do I need on a Vector?

 

[MotoPsycho]

There are 3 on the Vector...

 

[birkebeiner]

Nice

Think I might need a set... How much for three incl shipping to Norway?

 

[MotoPsycho]

Right around $155 USD

 

[birkebeiner]

How much do I have to disassemble my sled to put in these??

 

[MotoPsycho]

Remove seat, slide fuel tank back out of way. Depends how big your hands are, may have to remove air box also...

Not a terrible job to do.

 

[birkebeiner]

Okey, sounds good

Let me give it a thought. If I go for the Excell header I might as well order these since I then need to take the sled a part anyway


Thanks buddy!