Oil pressure and Water Temp Gauge install

[SSX600]

I would like to install a oil pressure and water temp gauge on my 2010 nytro xtx can someone tell me where the best place is to tap into the engine. I am also looking into installing a EGT TX-1 tach also is there a good place to hook that up also.

Thanks

 

[shadow44]

Go into the TY 4stroke garage section and look at NLVAMXs thread...he did an awsome some and has detailed everything on that subject

 

[TVBrian]

Just a note.... The threads on the block seem to not be NPT. I am currently looking for a better place to mount mine, looking at a flex line off the engine and then mounting the senders to the frame. Less weight hanging off a thread or two on the side of the motor.

 

[SSX600]

let me know what you come up with TVBrain. I would think that the thread would be metric.

 

[TVBrian]

Your right it is....

And because of the size of the sender for my gauge it doesn't fit on a tee like NLVAMXs did, so I would have had to use a tee, an elbow and 2 couplers to get it into a safe spot, hence the reason I want to mount it remotely. I'll keep ya posted!

You run sticks?