Oversize wheels on 22 sidewinder ltx le 137" issue

[shawnj]

Removed the whole kit today and will return and get correct size for what will work for me for now. Track only has 1000 Kim’s on it. Perhaps in a seasons time the 8.5” would have been fine.
Thanks all.

 

[rb2001srx700]

Has anyone tried the 8.5 wheels with a offset axle? Or is it just the 8.5 wheels being to tight to the transfer bar?

 

[REDLINE 1]

I been running the 8.5 on a 18 tcat I have about a 1/4” space between the wheels and bar. I recently switched to the 8” wheels The 8.5” hang a 1/4” below the sliders I noticed my double backers I have in the center of my track were taking a beating and getting bent My thought is with the wheels hanging below the sliders might be causing this.
I wouldn’t run an oversized wheel without it being offset up to keep it flat with the bottom of the sliders

 

[rb2001srx700]

I've been reading that the 19's and up needed a smaller oversize wheel. 8.2? Something with the transfer bar being to tightvtobthe 8.5 wheels.

 

[Richard Hodgins]

I was able to run these wheels on the 2020 and plus. Yes its tight! What I did instead of the bar (I took the bar out), was put 2 of the stoppers that are on the opposite side of the rear scissor for preventing it from coming forward. They will also prevent the scissor from hitting the rear wheels.

 

[Fast]

I thought about leaving the bar out but probably not a good idea. Might have to go back to the 8" wheels.

If you want to sell the 8.5" wheels I'll buy them