ruttinbuck
Veteran
- Joined
- Jan 25, 2012
- Messages
- 47
just picked up a 09 phazer rtx and have some questions.
1 what is the purpose of using the vmax secondary
2 is anybody using a rollover shutoff ( I'd rather not mess with a tether )
3 looking for a source for some orange handguards with mirrors in them
1 what is the purpose of using the vmax secondary
2 is anybody using a rollover shutoff ( I'd rather not mess with a tether )
3 looking for a source for some orange handguards with mirrors in them
MikeWalters
TY 4 Stroke Master
just picked up a 09 phazer rtx and have some questions.
1 what is the purpose of using the vmax secondary
2 is anybody using a rollover shutoff ( I'd rather not mess with a tether )
3 looking for a source for some orange handguards with mirrors in them
1 - much easier to tune (way more parts available, easier assembly). Stock phazers over-rev a lot.
someone else will chime in on your other 2. But adding that vmax secondary and tuning it properly gave my sled a huge boost in performance and overall driveability
Mooseman
I'm not all knowing. Post your question in forum.
- Joined
- Nov 3, 2009
- Messages
- 3,944
- Location
- Greely, Ontario
- Country
- Canada
- Snowmobile
- '07 Venture MP (gone)
'07 Phazer FX (gone)
'09 Phazer GT (gone)
'10 RS Venture GT (My current ride)
'10 Nytro FX (son's)
- LOCATION
- Greely, ON Canada
It's also more reliable. The original is an old design that uses a C clip that is known to fail and destroy the secondary.
ruttinbuck
Veteran
- Joined
- Jan 25, 2012
- Messages
- 47
1 what year vmax secondary are people using ?
2 does the stock belt still fit properly
3does it help with the engine braking
Thanks
2 does the stock belt still fit properly
3does it help with the engine braking
Thanks
Mooseman
I'm not all knowing. Post your question in forum.
- Joined
- Nov 3, 2009
- Messages
- 3,944
- Location
- Greely, Ontario
- Country
- Canada
- Snowmobile
- '07 Venture MP (gone)
'07 Phazer FX (gone)
'09 Phazer GT (gone)
'10 RS Venture GT (My current ride)
'10 Nytro FX (son's)
- LOCATION
- Greely, ON Canada
Pretty much all your questions can be answered here:
Reverse Secondary Brainchild Install
http://www.ty4stroke.com/viewtopic.php?t=101732
And in case you haven't seen this:
Phazer Frequently Asked Questions
Reverse Secondary Brainchild Install
http://www.ty4stroke.com/viewtopic.php?t=101732
And in case you haven't seen this:
Phazer Frequently Asked Questions
- Joined
- Jun 1, 2004
- Messages
- 7,699
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
as to the hand gaurds, you could always use a powermadd set with their mirror kit.
Similar threads
- Replies
- 17
- Views
- 3K
- Replies
- 14
- Views
- 4K
- Replies
- 4
- Views
- 31K