wheel10
Newbie
- Joined
- Feb 14, 2019
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Location
- madison
- Country
- USA
- Snowmobile
- phazer
Trying to widen my stance, but having trouble getting the spacers out after I remove the ski. I was told the only thing holding them on was the bolt, but I’ve banged away and it seems like they are attached to the spindle. Can anyone help?
- Joined
- Jun 1, 2004
- Messages
- 7,840
- Reaction score
- 2,038
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
they are seized onto the ski bolt tube. you might be able to get one of the outer spacers off by heating it with a torch if you do not have spares. as i have hit this before with mtx skis, i keep 2 whole assemblies brand new for when this happens.
blueironranger
TY 4 Stroke God
- Joined
- Feb 3, 2009
- Messages
- 2,002
- Reaction score
- 499
- Points
- 1,203
- Location
- Iron Range MN
- Country
- USA
- Snowmobile
- 2014 Viper XTX
2009 Phazer MTX
I heated mine up with a propane torch and then set the end of the spindle in a cut off coffee can that had a few inches of oil in it. The rapid cooling sucked the oil in between the spacer and the bolt tube and allowed me to break them loose with a pair of vice grips. Ever since I remove them yearly and coat them with wheel bearing grease.
