ProNoAction question

[Warrior Snowman]

"PTR";
How do you have the rear of the warrior set up? Mine has gotten a lot better once I had jacked up the shock mounting bolt to the stiff setting and have the spanner set to about 4. I am 270 and it will only bottom out when I hit the stuff really hard. Once or twice a day.

 

[buddah]

I lied..........it wasn't the last update. Thank goodness we took a closer look before putting the suspension back in. I found I could see light through both bars of the rear upright T brace. So back out with the suspension, more welds and gussets, and back in again. I'll say one thing, if this sucker breaks now...... A total of six repairs. This thing is looking good now

 

[pat the rat]

"PTR";
How do you have the rear of the warrior set up? Mine has gotten a lot better once I had jacked up the shock mounting bolt to the stiff setting and have the spanner set to about 4. I am 270 and it will only bottom out when I hit the stuff really hard. Once or twice a day.

same here,the bottom position for shock angle and 10 clicks on the rear shock with transfer rods with about 1/2'' gap,108 studs and dooly's up front