porkchop
TY 4 Stroke Master
- Joined
- Aug 19, 2010
- Messages
- 1,219
- Reaction score
- 107
- Points
- 788
- Location
- Central NY
- Country
- USA
- Snowmobile
- Nytro Nation
Berryman B-12 Chemtool
A solvent that works better than Seafoam IMO.
linky:
http://www.berrymanproducts.com/Default.aspx?tabid=140
A solvent that works better than Seafoam IMO.
linky:
http://www.berrymanproducts.com/Default.aspx?tabid=140
- Joined
- Nov 1, 2009
- Messages
- 3,564
- Reaction score
- 88
- Points
- 1,483
- Location
- Winnipeg, Manitoba
- Country
- Canada
- Snowmobile
- 2009 Phazer RTX
Did you get an improvement with the new gas? I would take it a step further and put some new plugs in.
At the start of fall there are always a lot of posts about bad running phazers. Most of them are solved with fresh gas and a plug change.
At the start of fall there are always a lot of posts about bad running phazers. Most of them are solved with fresh gas and a plug change.
Joshua
Expert
- Joined
- Apr 14, 2010
- Messages
- 427
- Reaction score
- 40
- Points
- 778
- Location
- Newfoundland
- Country
- Canada
- Snowmobile
- 2018 Yamaha Sidewinder BTX LE 50TH
I did change the gas still no different. I'm going to bring it in for a service and bushing change anyway, so I'm going to get the plugs changed too.
It could also be a clutching issue.Unlikely with it up on a stand but a broke spring in either clutch could do that.Never hurts to clean the clutches anyway when they are apart.
Daranello
Suspended
Seafoam. Canadian tire
BombaPolaYama
TY 4 Stroke Master
Ah, a man of few words!Daranello said:
