RA Mono Adjuster Dial

[Gone Blue]

Maybe a silly question. I was adjusting my front limiter strap on my 07' Rage GT this past weekend and went to turn the RA adjuster to soft before I used a ratchet strap to compress the front of the skid. I wasnt paying attention when I turned the dial and turned it past the softess setting. I thought there were stops on both ends when you turn the dial. Am I confused? Mine now seems to tunr 360 degrees. Thanks, G.B.

 

[Viper_Dave]

I take it that you haven't adjusted it that far before? It's OK, they will make more than 1 full turn. The limiter is actually in the shock itself. Turn it towards Soft until it stops. you can then turn it towards Hard and it will stop again. Should be almost 2 full turns.

 

[Gone Blue]

I take it that you haven't adjusted it that far before? It's OK, they will make more than 1 full turn. The limiter is actually in the shock itself. Turn it towards Soft until it stops. you can then turn it towards Hard and it will stop again. Should be almost 2 full turns.

Thanks Viper Dave. I figured that was the case since I did not have to really crank it to go past the end stop. Thanks, G.B.