pips pop
Newbie
What pivot style bar riser is max. on a '05 Rage without having to add the longer cables & looks good?


- Joined
- Jun 28, 2004
- Messages
- 2,436
- Reaction score
- 500
- Points
- 1,723
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
Riding partner put a 2" on his with no problems. Moved a few of the cables and wires around, but is fairly self-explanatory once the riser is installed.
sleddermb
Extreme
I put a power madd pivot and a 2 inch riser (pm as well) which gives a total of about 3 1/2 inches. It's a nice height and the cables aren't stretched, but I definitely wouldn't go any higher without longer cables.


DaJudge
Lifetime Member
- Joined
- Nov 29, 2005
- Messages
- 334
- Reaction score
- 3
- Points
- 993
- Location
- West Michigan
- Country
- USA
- Snowmobile
- '06 Rage
I put a 3 1/2 Rox on my Rage. It just required relocating the parking brake cable.
pips pop
Newbie
Thanx for the info,,, will be ordering one today!!

Gone Blue
VIP Member
- Joined
- Oct 11, 2006
- Messages
- 1,628
- Reaction score
- 209
- Points
- 1,278
- Location
- Howell, Michigan
- Country
- USA
- Snowmobile
- 08' Nytro RTX 40th Anniversary - Stretched
DaJudge said:I put a 3 1/2 Rox on my Rage. It just required relocating the parking brake cable.
DaJudge, Did you have a problem with the cables getting pinched between the top of steering column hope and the opening in the tank cover? I tried to install my 2" Rox pivot riser on my 07 Rage and by the time I rotated the riser forward, the cables are wedged between the tank cover opening the the steering column hoop. G.B.
Similar threads
- Replies
- 21
- Views
- 3K
- Replies
- 3
- Views
- 2K