vmaxx05stud
Pro
is there any way to greasethe outside wheels like the rest of the idlers by removing the seal? it looks like there pretty much a enclosed bearing w/no way of getting to it? thanks.
170plus
TY 4 Stroke Junkie
- Joined
- Jan 14, 2004
- Messages
- 541
- Location
- washburn maine
- Country
- USA
- Snowmobile
- 2021 polaris assault 850,18 sidewinder ltx,14 nitro xtx,06 apex rtx,
throw them away and buy new aftermarket wheels,about 23 bucks each and make sure you buy the type with the replacable bearings
Len Todd
TY 4 Stroke God
170plus said:throw them away and buy new aftermarket wheels,about 23 bucks each and make sure you buy the type with the replacable bearings
Something like These?
Sled Solutions
Expert
If Yellow works on your sled I have 3 BRAND NEW wheels off my FX Nytro that I'll sell CHEAP!
Len Todd
TY 4 Stroke God
Re: wheels
Those are nice too.
rehm70 said:
Those are nice too.
No they warp... (the spoke one)
Go with LenTodd suggestion
Go with LenTodd suggestion
vmaxx05stud
Pro
his suggestion is the stock wheels. i heard someone once tell me that they used a needle to inject grease n the bearing, think this would work? everyone of these da# wheels are junked and dry grease. its almost like they went 4 wheeling w/ it in the water and mud.
Len Todd
TY 4 Stroke God
The ones I suggested don't look stock for my sled. They were stock for pre-RXes though. The ones I got did have removable bearings and did not need an extra bushing and very large washer. We are talkin' the rear axle vs an idler here. Right?
If you use a needle, you can get in there. however, it did not last very long. I suspect I was either to late or just opened the door for water.
If you use a needle, you can get in there. however, it did not last very long. I suspect I was either to late or just opened the door for water.
vmaxx05stud
Pro
yea its the rear wheels. i cleaned and regreased the center wheel as it has the removable bearing unlike the 2 outside ones.
Hmm, I didn't know those warped. ROCKERDAN has those, I thought he figured they were good?
Crewchief47
Lifetime Member
- Joined
- Jan 16, 2006
- Messages
- 2,830
- Location
- McGregor, ON Canada
- Country
- Canada
- Snowmobile
- 2008 Nytro MTX 45th
BA APEX
Expert
vmaxx05stud
Pro
i just ended up regreaseing all the wheels i could and using the ones i have. hopefully they will last the season.
Similar threads
- Replies
- 5
- Views
- 1K
- Replies
- 5
- Views
- 1K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.