Tantrum
Extreme
- Joined
- Oct 26, 2007
- Messages
- 75
- Reaction score
- 0
- Points
- 686
- Location
- NJ/NH
- Website
- www.adrenalinecam.com
Yep...need a little utility out of my performance sled. (2007 Apex GT)
Bought the kids an Equinox Snowcoach and need to drag it around. Has anyone ever installed one of these (8FA-W7541-00-KT)?
Is this my only option?
How about a link or part number for the "Hitch or Hook Hitch" mentioned sold seperatly.
Bought the kids an Equinox Snowcoach and need to drag it around. Has anyone ever installed one of these (8FA-W7541-00-KT)?
Is this my only option?
How about a link or part number for the "Hitch or Hook Hitch" mentioned sold seperatly.
Attachments
I went on the Yamaha Canada blog page recently and found a much broader array of accessories for all of the current sleds than what you will find on the US site. (Look at the left side of the page for the word "Accessories") The hitches are there as well. Try the part numbers with your dealer and see if they work for Yamaha's U.S. accessories inventory.
http://snowmobiles.yamahablogs.ca/
http://snowmobiles.yamahablogs.ca/
Tantrum
Extreme
- Joined
- Oct 26, 2007
- Messages
- 75
- Reaction score
- 0
- Points
- 686
- Location
- NJ/NH
- Website
- www.adrenalinecam.com
Very helpful
Thanks Paul
Thanks Paul
Sask Attak
Expert
I have a hitch on my attak it works very well and looks good too. Very easy install. only need to drill 6 holes which are laid out for you.
gitrdun
Lifetime Member
- Joined
- Mar 15, 2007
- Messages
- 555
- Reaction score
- 93
- Points
- 1,008
- Location
- north of superior
- Country
- Canada
- Snowmobile
- 07 Attak
Tantrum, are you sure that your price of 91.95 is not just for a PICTURE of the hitch. I see the same hitch in the Canadian Yamaha accessories site that Paul_C provided, is listed for 238.62. A SLIGHT difference in price, again. Sounds like you can get the better deal. Sorry, that aside, I suspect you will need that type of heavier hitch if you are pulling a substantial sleigh with passengers.
rightarm
TY 4 Stroke Master
Are you sure that the part #'s from the Canadian web site can be used in the U.S.?
No. That's why I said to run them past the dealer to confirm that they work for that purpose. I did notice that they did match for the part shown in his first post.
marathon mike
Pro
I had that model hitch on my apex, it is very strong and depending on where you buy it (us-ca) is expensive. there is a 2nd model available from yammi for about $90 (us) which i installed. will be trying it out later. its much easier to install and replaces existing rear bumper only and has the pintle hook up already.
Mike
Mike
Tantrum
Extreme
- Joined
- Oct 26, 2007
- Messages
- 75
- Reaction score
- 0
- Points
- 686
- Location
- NJ/NH
- Website
- www.adrenalinecam.com
marathon mike said:I had that model hitch on my apex, it is very strong and depending on where you buy it (us-ca) is expensive. there is a 2nd model available from yammi for about $90 (us) which i installed. will be trying it out later. its much easier to install and replaces existing rear bumper only and has the pintle hook up already.
Mike
Mike do you have a part number on that hitch?
grubber
Veteran
I just had the same hitch installed on my 07 Apex GT it works great. I ordered it from the U.S as it was almost half the price of Yamaha Canada for the same part.
marathon mike
Pro
i will get it for u monday,
mike
mike
marathon mike
Pro
part # for less expensive is 8FT-W7541-00-KT LIST 119.95 CAN OR ABOUT 92 US
BIGGER MODEL IS 8FA-W7541-00-KT LIST $238 CAN
Mike
BIGGER MODEL IS 8FA-W7541-00-KT LIST $238 CAN
Mike
Tantrum
Extreme
- Joined
- Oct 26, 2007
- Messages
- 75
- Reaction score
- 0
- Points
- 686
- Location
- NJ/NH
- Website
- www.adrenalinecam.com
Mike
Thanks for the reply
I just ordered from Port the 8FA-W7541-00-KT for $90 and the pin hitch for $10.
Part number 8FT-W7541-00-KT is for the attack, I have an Apex which I neglected to mention in my original post.
Ill post some pics when I get it installed.
Thanks for the reply
I just ordered from Port the 8FA-W7541-00-KT for $90 and the pin hitch for $10.
Part number 8FT-W7541-00-KT is for the attack, I have an Apex which I neglected to mention in my original post.
Ill post some pics when I get it installed.
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.