could be the belt sitting to high/too tight
markowinnipeg
Extreme
I will try swapping to spare belt this weekend
berge75
Expert
U could try untwisting the secondary cam spring from 6-3 to 6-1.
09nytro
TY 4 Stroke God
I'm running 8950
markowinnipeg
Extreme
So I pulled the helix and spring of the secondary, the only number I can see on the fixed sheeve is a 3 and looking at the sled I am one hole left, is this number 1?
This was the same hole that it was in?
This was the same hole that it was in?
markowinnipeg
Extreme
ok this is wierd put the secondary back together as it was (6-1 I am assuming), adjusted the chain case and now took it out for a rip and top rpms are 8900 to 9000 a drop of 300?
Could it be my belt was hot when I was hitting 9300 as it was warm outside?
Could it be my belt was hot when I was hitting 9300 as it was warm outside?
