rx1 carb cleaning

[rapidroy5858]

I will leave the orings off then , I do see where cleaning the pilot jets are a pain to clean..I run a copper wire through them and spray out with carb cleaner then when I blow air through them it packs more crub in the opening, looks like I need to just keep cleaning till no more junk collects in it.
Thanks again

 

[Sled Dog]

Get some Mechanic in a bottle and run around 4 oz through a tank of gas. Enjoy your ride and ride safe.

 

[rapidroy5858]

New question/issue

I ordered a rear guide wheel off ebay..the one I received is the type that the bearing can be replaced pn 8cr-47550-00-2 the one in the skid has the type that the bearing cannot be replaced in..any idea what bearing I need for the new wheel? Will I need the plastic bushing for the bearing as well?
Thanks!

 

[Sled Dog]

You need to fill in your location its a site requirement. I am not sure of the bearing but someone will know and chime in. We are a very helpful bunch here.

 

[rapidroy5858]

Thanks again ...thought I had filled in my location..I will go back to profile and try again...Northwest Indiana by the way

 

[Paul]

X2 on the Mechanic In A Bottle, swear by it!!!