BigDogrx1
TY 4 Stroke Guru
- Joined
- Dec 2, 2014
- Messages
- 891
- Reaction score
- 240
- Points
- 438
- Location
- SOO (UP) MI
- Country
- USA
- Snowmobile
- 2003 rx1
Hey Guys, 03rx1 is jacked up with a 08 mono skid ready to put in, waiting for templates (Tuesday), I don't have any idea. Where to set transfer rod(how many threads showing) have spring pre-load set @ 4, shock adjusted in middle, limiter straps are on loosest holes,
Its sure easier to adjust before its installed, I mostly trail ride & am about 230 w/gear.
Not super aggressive, but don't putput either, is someone similar and could maybe give me some adjustements to start out with, C-clip on shock has 1 groove showing, thanks for any advise Larry
Its sure easier to adjust before its installed, I mostly trail ride & am about 230 w/gear.
Not super aggressive, but don't putput either, is someone similar and could maybe give me some adjustements to start out with, C-clip on shock has 1 groove showing, thanks for any advise Larry
