• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Sled backfiring

2008 Nytro RTX

TY 4 Stroke God
Joined
Dec 23, 2007
Messages
1,697
Location
Norwich,NY
Went to start my sled today after trying to start it a few time its didn't run right and back fired when I gave it gas. Could it be gas from last season just messing it up? I think taking the old gas out and some fresh gas with some injector cleaner it should be fine,Am I right?
 

I had this happen to me. after the deal did some warranty work i got it back and it was doing it. i came to the conclusion they didnt wait for the red warm up light to go off and it loaded up. i put new plugs in and its been fine ever since.
 
try some seamfoam injection cleaner first, if thats not it i would try plugs next. they are easy to do.

like Stop said, careful pulling the boots off but once they are i put plug socket on an extension and put it down in the hole, then you should be able to attach the ratchet to it.
 
I have the sled for almost 3 years and it never did this,It was hard starting then it ran like #*$&@. I truly hope its not the E-10 fuel fucking with my motor AKA BANG O. So out comes that gas in goes fresh with sea foam and maybe if that doesn't work some fresh plugs. Should I put the Sea foam in with the fresh or the old gas?
 
Plugs are relatively easy to change. How about finding non oxygenated gas (no ethanol) not only for the riding season, but especially for the off season with storage in mind. I am a strong advocate of sea foam as well.
 
Would anyone happen to have a write up on how to change the plugs on these things? One thing I miss about the old two smokes,Pop the hood and in 4 mins you had your plugs out and in
 


Back
Top