Slider length on 136" track slides?

[4strokeluvr111]

I posted this in the suspension forum but it didn't get any looks. I took my slides off my 14 Vector LTX via the reverse the track method. But I can't get a good measurement on the length of a slides. Does anybody know the length of the slides for a 136 inch track?

 

[maim]

i will try and measure the sx venture in the garage when i get home. royal is saying 51-3/8" but i am not shure.

 

[4strokeluvr111]

i will try and measure the sx venture in the garage when i get home. royal is saying 51-3/8" but i am not shure.

Thank you!

 

[DGZRT]

Take a piece of tape and install it from one end to the other . peel the tape off. Lay it flat and measure ! Works good for curled up things.

 

[4strokeluvr111]

Take a piece of tape and install it from one end to the other . peel the tape off. Lay it flat and measure ! Works good for curled up things.

Thanks Dan

 

[maim]

50" is the 136" pro action plastic length on the sled in garage.

 

[dmaxx]

I usually match the old ones up with the new slider, mark it and cut.

 

[Pstn head]

Take a piece of tape and install it from one end to the other . peel the tape off. Lay it flat and measure ! Works good for curled up things.

My vote for Mechanic of the month right there !!!

 

[4strokeluvr111]

50" is the 136" pro action plastic length on the sled in garage.

I have a Mono skid.

 

[Metallicat]

Buy the Yamaha slides. They are cut and recessed correctly. I have aftermarket sliders that have been sitting in my garage for 4 years.

 

[Port-Parts]

136" mono-shock slides are 48.86" long

 

[maim]

sry only 136" skids i have around are 2 proactions and older stuff that runs rail extensions. usually cut mine in the sled with a sawsall or hacksaw.