Apexpat
VIP Member
- Joined
- May 13, 2014
- Messages
- 125
- Reaction score
- 61
- Points
- 833
- Country
- USA
- Snowmobile
- 2013 Apex
Changing the spark plugs on my 2012 Vector for the first time at 12,000 miles . Took the plugs out of the box and noticed they have threaded terminals and not capped. My 13 Apex has caps so I’m assuming they have different coils? I’m sure I have the right plug taken from the clutch cover Cr8e NGK. Why would one have a threaded terminal end and the other a cap?
Stubbs
TY 4 Stroke Master
- Joined
- Nov 7, 2006
- Messages
- 1,208
- Reaction score
- 699
- Points
- 1,378
- Location
- Uxbridge, On, Can.
- Country
- Canada
- Snowmobile
- ‘16 Apex XTX with 137” Mono II
+ other gooodies
- LOCATION
- Uxbridge ON
Can’t answer your question as to why, but yes, the cr8e plugs used in the three holer’s are cap less.
RobX-1
VIP Member
- Joined
- Apr 13, 2003
- Messages
- 2,496
- Reaction score
- 1,675
- Points
- 1,583
- Location
- Coldwater, OH
- Country
- USA
- Snowmobile
- 18 50th Apex XT-X, 08 40th Apex LTX GT, 08 40th Nytro RTX, & 03 RX-1
Here is what you need as I have encountered this before with the NGK plugs I run:
NGK spark plug terminal nut 145-48
NGK spark plug terminal nut 145-48
