VMX
Veteran
had this problem on my 07 rtx stalling when coming to a stop low idle speed turns out the exhaust cam had skipped a tooth reset cam timing and its all better 22000 miles and still runs perfect
renegademan17
Extreme
- Joined
- Mar 24, 2007
- Messages
- 59
- Age
- 53
- Location
- Duluth, MN
- Country
- USA
- Snowmobile
- 2007 Attak, 97 700SX, 76 Ski Doo Olympic
Will be having that done at end of winter, completed CO adjustment and idle. Runs great now but still has a little stumble when cold, but better than before.had this problem on my 07 rtx stalling when coming to a stop low idle speed turns out the exhaust cam had skipped a tooth reset cam timing and its all better 22000 miles and still runs perfect
xj4me
Lifetime Member
Mr Sled where is this pressure sensor located?I had this happen to a snowmobile. Unplug the electrical part of the pressure sensor. It has a vacuum line on the bottom but don't unplug that. It will throw a code but won't hurt anything. See if the problem goes away.
- Joined
- Apr 13, 2003
- Messages
- 21,538
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Mr Sled where is this pressure sensor located?
Its on the throttle body rack.