So I’ve had some 136 tip up rail extensions for a couple years now and I am finally going to stretch the Nytro to 136 this off season. I plan on going with the 136 tip ups and a Intense 1.5 track from the stock 1.25 Ripsaw. Question is should I do a gear change as well? Current set up is a Schmidt brothers stage 2 clutch kit. Thanks in advance for the help.
Or I may do the 137 storm 150.
- Joined
- Jun 1, 2004
- Messages
- 7,734
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
based on older sleds i did that to, i would leave it alone for gearing. usually just had to adjust the clutching.
grizztracks
Tech Advisor
- Joined
- Feb 24, 2005
- Messages
- 3,110
- Age
- 60
- Location
- Scio, NY
- Country
- USA
- Snowmobile
- FX Nytro RTX, RS Vector, SR Viper RTX SE
I run Schmidt bros stage 2 and stretched my RTX to a 136" with the Ice ripper track. No gearing or clutch changes needed.
I've seen failures with the Ice Storm track when they first came out. Hopefully that's no longer an issue. I'd like to install one on my Viper.
I've seen failures with the Ice Storm track when they first came out. Hopefully that's no longer an issue. I'd like to install one on my Viper.
jimbur
Expert
- Joined
- Aug 16, 2013
- Messages
- 204
- Location
- Bernville Pa
- Country
- USA
- Snowmobile
- 09 NYTRO XTX
14 NYTRO XTX
08 NYTRO RTX
07 PHAZER
- LOCATION
- Pa.
Wife's nytro has the 1.5 intense 136 with stock gearing. Seems a good match.
