stronger brake pads

[Turbor]

looking for brake pads that have more grip than the oem pads, any suggestions?

 

[burgerbone]

Did you get oil on the pads or rotor? If your track locks up they are working .

Most of the time you don't even need brakes since the injectors pulse when slowing down.

 

[Bahr05]

I gotta pile of studs in my track, and it'll still lock up on any traction surface, i.e. grass, snow, hardpack, ice, etc... I don't think the pads are your problem. Might have seals out in the brake system somewhere. My guess is in the master cylinder itself. Arctic cats had a few issues with the Wilwood master cylinders needing to be rebuild. And those are some good quality brake systems.

 

[Turbor]

i can lock up the track thats not the problem lol, looking for pads with more bite so i can lock up the the track with less effort on the lever, im a small guy with small hands lol

 

[toyota4runner]

Lots of good options on eBay for cheap
http://www.ebay.com/bhp/hand-strengthener
Lol

 

[nitris223]

You could try a longer lever if you could find one to fit. It would give you more leverage. I never thought the brake was that hard to pull and actually thought it locked up pretty easy. I use 2 fingers for braking. Maybe try bleeding your brakes and see if there is any air bubbles in there.

 

[toyota4runner]

I believe the Nytro brake lever is position adjustable as well. There's a little adjuster on the side closest to the bar with a jam nut. It allows you to move the lever closer to the bar a bit for people with smaller hands