The best after market skis

[steveg]

Was wondering if anyone had put any aftermarket skis on their 08 FX Nytro. Was looking for the best ones to put on mine for trail riding.

 

[tkuss]

I love the simmons on my Nytro. Would defianlty buy them again. I am amazed how they calm the front end down, but still handle awesome.

 

[YamYboY]

I have the slydogs on mine and cannot say enough good things about them

 

[XTX622Kane]

I have simons gen 1 and the bergstrom triples on one side of ski and the single on the other. It cost a little coin but I have triple 8"s and single 6"ers. Lot of carbid I know but they are not all touching at one time and as you turn and the ski edge moves the other carbides will bite and continue to provide grip in hard corners. You have to set up the suspension but I can smoke anyone in the twistys. I can corner now like I never thought possible especially on the xtx. Found my best set up and would never even think of anything else since I have no problems and could not corner any harder then these ski/carbide set up gives me. Any harder or faster and I would have to think about my sanity.

 

[Kråkan]

SLP Powder pro

 

[Swiss Sledder]

Was wondering if anyone had put any aftermarket skis on their 08 FX Nytro. Was looking for the best ones to put on mine for trail riding.

Did you look at the FAQ thread at the top of this forum? Look under the heading Skis where it provides you with three different threads on this very topic.

 

[TechMaples]

SLP Powder pro

X2 brother!!!!

 

[UP Brett]

X3 on the slp powder pros

 

[stopdropanroll]

After some adjustment I really like my Powder Hounds

 

[journeyman]

I have Powder Pros on my Viper and they work great. The nice thing is they have two sets of mount holes on the plate that by simply jacking the front end up a couple inches you can change it in 5 minutes. Run them in the back holes and if it darts too much go to the front holes. It makes a difference for sure. I just tested them both last week in the UP.

 

[sheetwright]

C&A Pro razors with 8" carbide is what I like. Great cornering, and no darting. IMO