The Totallyamaha Video Production Department

[Tork]

You guys are making some great videos. Besides your original thread/post, why dont we post all the links here also and see if we can get a nice collection that is all in one place and easy to find. A picture is wotth a thousand words, and moving pictures are worth that a thousand times again.

We need the link from Norway or Sweden in here, Apex VS Mach Z from last winter :rules

 

[Turbo Tim]

Here's some to start out :

http://media.putfile.com/vmax4turbohill (vmax at big iron shootout)
credit to veedy

 

[Turbo Tim]

oops is this for Apex and Attack only ?

 

[Silverbullet]

HOLY .....Nice save at the top

 

[Tork]

oops is this for Apex and Attack only ?

Tim they are all ok, do want them all here or one in RX too?

You know what, putting one in RX might be a good idea

I will PM the moderators of that section, very sure they will like the idea.

 

[RED800]

trying to get the apex and machz video up but im having problems

 

[Turbo Tim]

oops is this for Apex and Attack only ?

Tim they are all ok, do want them all here or one in RX too?

You know what, putting one in RX might be a good idea

I will PM the moderators of that section, very sure they will like the idea.

I was thinking a single video link thread would be good instead of having them split up ,or maybe just have the same thread in the rx section that forwards over to this page ?

 

[BA APEX]

11-27 couple radar/drag videos & pics

Here's a few videos & pics taken on Sunday 11/27. Few of us took some sleds out in a field. got faster as the day went on. I(my son actually) hit 105 on radar. a tuned up F7 hit 107mpg, a doo Rev800 hit 104, a doo Rev600 hit 102(I think). a new Tony Stuart F-7 hit 102(I think).
Everyone (doo & cat guys) were impressed with the "slow" 4 stroker, they couldn't believe how good it felt & ran.
I am getting a big boy rear spring so I didn't even mess with the transfer or rear spring. the sled did wheelie most of the time when you hit the throttle or it spun more than it should have. messing with it probably helped out a lot.
- My mph's were only about 2-3 mph slower with me on my rtx than with my son on it. he is about 130lbs & I go 300lbs.
- the digital read 118 when the radar said 103.
- my rpm's barely went over 10k, & that was at the end of the day.
- sled started with 19miles on it and we finished with 70miles on it.
- I left skid set at what it came at. 2nd to softest on spring.
- I studded it with 144(a 168 pattern without the outside studs) 1.375 up the middle double & single backers with bith nuts. after more testing I may add the outside studs.

http://media.putfile.com/RTX-F7
http://media.putfile.com/RTX-F7_2
http://media.putfile.com/xApexf7_3
http://media.putfile.com/ApexJordan104
http://media.putfile.com/Ted-F7
http://media.putfile.com/RTX-Dylan
http://media.putfile.com/SXrJordan

http://putfile.com/pic.php?pic=11/33023321778.jpg&s=x11
http://putfile.com/pic.php?pic=11/33023244438.jpg&s=x11
http://putfile.com/pic.php?pic=11/33023343733.jpg&s=x11

more vids added 12-02-05:
http://media.putfile.com/kory8x2
http://media.putfile.com/250-rocket
http://media.putfile.com/rtx-jordie-3
http://media.putfile.com/ZX8

 

[2BLUE4U]

So what was the result of the three runs in the video versus the F7? Looks like the hole shots were pretty even.

 

[BA APEX]

So what was the result of the three runs in the video versus the F7? Looks like the hole shots were pretty even.

ran that sled a few times and depending on the start , that would be the winner. the F7 was modified and would pull ahead toward the top end(700-800ft.) otherwise it was fairly even. the modded F7 was 2mph faster on radar at the top.
My son a nephew did allmost all the dragging with my rtx. the weigh 130 & 170lbs.

 

[Bakemono]

That SXr looked fast.

 

[Mrplow]

I'll start out with just this one:


http://media.putfile.com/Break-in-RTX


But, will be adding more...........

 

[Turbo Tim]

http://www.hsperformance.no/video/rx_vs_machz1000.mov

Apex vs Mach z

 

[Yamitoba]

Awesome vids so far... does anyone know how... or if it's possible to save these videos to the hard drive? Thanks. :exc:

 

[T-Bone]

Yes, right click on the link and go to Save Target As...