Throttle adjust

[phazerguy]

The throttle is too high. I would like to turn it down for seated comfort. I loosened 2 phillips screws and is not loose on handle bars. Anyone done this?

Thanks

 

[scb]

I adjusted mine by loosening those two screws. It wouldn't move at first but it was just stuck to the grip.

 

[phazerboost]

I haven't tried moving the throttle on my phazer but when I crashed my R6 last year I found that the throttle was only able to be mounted in one position. There was a hole in the handle bar and a locating pin on the throttle assembly.

 

[checkman39]

it is adjustable. like scb said it is stuck to the grip. play with it and it will move.

 

[phazerguy]

It was stuck. now adjusted thanks, no more sore wrist.

 

[ecopter]

You should be able to just grab the whole assembly and twist it into position without loosening anything.

jf