Throttle bodies boot to motor question

[rerod]

Ok motor heads. Can I use a different boot from the throttle bodies to the motor, or do I have to use the stock boots because of the way the boot aligns the two? Its on a Apex I have spent two years trying to keep my boots on and I have tried everything. The last thing I used was glue and it worked for about a half of season but now the boots are ripped. Thanks

 

[Ted Jannetty]

Ok motor heads. Can I use a different boot from the throttle bodies to the motor, or do I have to use the stock boots because of the way the boot aligns the two? Its on a Apex I have spent two years trying to keep my boots on and I have tried everything. The last thing I used was glue and it worked for about a half of season but now the boots are ripped. Thanks

Replace them with stock boots and Use these
http://vibrantperformance.com/catalog/i ... c7b6929403

I stock them.

www.turboaddictionparts.com

Ted.

 

[rerod]

I have my throttle bodies strapped down and safety wired to the started bolt in front and coil bolts in back and I have my intercooler strapped down.

 

[wheeline]

Ted, will those work on a RX-1?

 

[Ted Jannetty]

Ted, will those work on a RX-1?

YES they will!

 

[wheeline]

Ted, will those work on a RX-1?

YES they will!

Do you have any pictures of them installed? I can't tell for sure where they go.

Thanks