PattyJack
Pro
- Joined
- Oct 9, 2008
- Messages
- 168
- Reaction score
- 0
- Points
- 696
- Location
- St. John's, NL
- Country
- Canada
- Snowmobile
- 2007 Phazer GT
Well I tipped my phazer almost upside-down and of course the oil and radiator fluid leaked. The oil got into my airbox so im wondering is it a big deal or should i just clean it up? Simple question i Know, just a little worried haha thanks!
connors
Veteran
i think the real question here is where are sledding to here on the rock? haha but i think your just have to clean it up abit...
PattyJack
Pro
- Joined
- Oct 9, 2008
- Messages
- 168
- Reaction score
- 0
- Points
- 696
- Location
- St. John's, NL
- Country
- Canada
- Snowmobile
- 2007 Phazer GT
Haha Christmas eve actually, just enough for a small rip. I guess an oil change and a new filter wouldn't hurt either.
Your going to love that filter change unless you take it to a dealer for the challenge!
Weapon X
TY 4 Stroke Junkie
ha ha thats oil and filter sounded easy!
07Nytro
Expert
- Joined
- Dec 8, 2007
- Messages
- 204
- Reaction score
- 0
- Points
- 426
- Location
- Winnipeg, Mb
- Country
- Canada
- Snowmobile
- None right now
clean out the airbox and spray some carb cleaner onto a paper towel and dab the mesh over the air filter. It happend to me.
OST
Expert
RedRX1 said:
If you're attempting it yourself you better have the proper oil filter wrench.
And lots of patience .... arrrrgh!!!
Some band aids for your knuckles might be in order as well!
PattyJack
Pro
- Joined
- Oct 9, 2008
- Messages
- 168
- Reaction score
- 0
- Points
- 696
- Location
- St. John's, NL
- Country
- Canada
- Snowmobile
- 2007 Phazer GT
Soo i took off the panels and did a good cleaning job. This is going to be an anoying problem, I expect this won't my only roll-over this season.
rhino_live
Expert
i rolled the other day to, didn't do anything to it, we were 60kms out from where we camped and only option was to fire it up and drive....kinda puffed a bit of blue smoke and was fine after that.
After I was done with the oil change, a dealer gave me a good hint. Use K&N oil filters, they have a socket fitting attached to the end for easy removal. OST...I used a channel lock to get my old one off. Couldn't find a filter wrench that I could fit in the area and still turn it.
The design engineer that came up with this ought to be shot!
PattiJack...On the stability issue, have you changed the torsion bar mounts to max stiff? that should help you keep it sunny side up!
The design engineer that came up with this ought to be shot!
PattiJack...On the stability issue, have you changed the torsion bar mounts to max stiff? that should help you keep it sunny side up!
connors
Veteran
when you role the sled just ip it back over as fast as possible... last year i roled mine down a small hill and it landed rite side up some how and there was no mess anywhere
phzmtnlite
Pro
I roled mine yeaterday and it was upside down for about 30-40 seconds and there were no issues whatsoever
