SIMMER
TY 4 Stroke Master
Could someone with the service manual from an Apex and or anything with a MonoShock skid diagram send me a page that breaks down the transfer rod?
I looked on the parts fiche (on-line) and there's a collar that I'm not entirely sure is part of the transfer rod or not. I lost the nut/bolt and everything from the front pivot point of the rod on the trail last week and I'm not sure how it all goes back together with nothing to reference.
See PART #56 on the fiche........is this collar part of the transfer rod that bolts to the pivot arm? It looks as if the bolt goes through the collar but it's tough to tell. Thanks.
I looked on the parts fiche (on-line) and there's a collar that I'm not entirely sure is part of the transfer rod or not. I lost the nut/bolt and everything from the front pivot point of the rod on the trail last week and I'm not sure how it all goes back together with nothing to reference.
See PART #56 on the fiche........is this collar part of the transfer rod that bolts to the pivot arm? It looks as if the bolt goes through the collar but it's tough to tell. Thanks.
Attachments
SIMMER
TY 4 Stroke Master
Anyone? 
Isn't that the exploded transfer rod at the bottom of the diagram?
Nos. 43 thru 61?
Nos. 43 thru 61?
rosco
Extreme
It is hard to tell. 56 does look like a bushing related to the attach bolt, however in the expanded veiw on the bottom they are indicating a bushing 51 that would appear to be the bushing for the rod end. You may have to talk to the service guys at the deallership to clarify. nothing against a good parts guy but alot of them don't know what their looking at either so best to speak to the guys that work on them and hopefuly you get someone that is familiar with it.
Will 56 fit inside of 51 & 52 or vise versa?
rosco
Extreme
i believe 52 is a washer and it wouldn't make sense to have two seperat bushings installed one inside of other. But you never can be sure.
Similar threads
