I got a 2011 nytro 162 and can't find a tunnel extision for it to go to a 174. Found lots for 09 and older but not a 2010 and newer.
tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
I dont think you would really need one. The axle only moves back 6ish inches and theres more than enough clearance to the flap imo..
Got skid in and not even close to working. Needs at least 4-5 inches. The center of the axle is almost at the tunnel drop down for the flap.
towerrigger
TY 4 Stroke Junkie
Did you try CR racing? The 08-09 may work with some trimming as the profile looks to be the same. Van amburg also make some nice looking ones that may work but are pricey. Looks like the second link may work for you?
http://vanamburgonline.com/catalog/prod ... 9202fe1545
http://vanamburgonline.com/catalog/prod ... 9202fe1545
http://vanamburgonline.com/catalog/prod ... 9202fe1545
http://vanamburgonline.com/catalog/prod ... 9202fe1545
Checked with both of them already neither make for what I need either wrong. Length or wrong year
pro116
Lifetime Member
Hartman shows they make them on there website.
tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
Just make one then.....? Its only aluminum, and would be easy to bend..