Tunnel protector install

[25SRX]

Need advise on tunnel protector install after studding the track on 2025 SRX.

 

[Pstn head]

What sort of info?

 

[25SRX]

Instructions say to drive a self tapping screw to secure them. With the screw on the snow flap end, no length is given. I don’t want to screw through the tunnel.

 

[25SRX]

Any thoughts on driving a set screw through it and stopping it on the flat part of the exchanger? Will the screw wear a hole in the exchanger from vibration?

 

[baggs66]

They are held on with adhesive, they slide in from front then put in screw and slide foward until it stops, the screw just keeps them from being pulled back forward do to contact with track, do not screw into flat ask me how I know lol

 

[25SRX]

Perfect!! Thank you!

 

[darv]

There should of been 3 screws that came with the kit

 

[25SRX]

I did not get the screws, can you tell me just what to use?

 

[darv]

I did not get the screws, can you tell me just what to use?

Here is the part number it a cat # 0423-946 and you need 3

 

[25SRX]

Thank you, I appreciate it!