Chris Hammer
Veteran
- Joined
- Dec 26, 2020
- Messages
- 42
- Reaction score
- 3
- Points
- 38
- Location
- Sydenham
- Country
- Canada
- Snowmobile
- Rx Warrior 1000 cc LE 2004
Hi guys, I only have the soft yellow premium fuel line for my fuel pump vacuum line. Is this to soft of a material for this application? What is recommended?
Sled is bogging at 1/2 throttle then picks up at 3/4 but not reaching top speed.
Thanks
Sled is bogging at 1/2 throttle then picks up at 3/4 but not reaching top speed.
Thanks
- Joined
- Jun 1, 2004
- Messages
- 7,866
- Reaction score
- 2,053
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
the clear yellow line will collapse under vaccume from the engine. i use braided automotive fuel line rated for at least 14 psi for any of my pulse lines.
Chris Hammer
Veteran
- Joined
- Dec 26, 2020
- Messages
- 42
- Reaction score
- 3
- Points
- 38
- Location
- Sydenham
- Country
- Canada
- Snowmobile
- Rx Warrior 1000 cc LE 2004
Hi Maim, that is what I thought.
Will switch it out tomorrow and report back tomorrow. At the time that is all the line I had in the shop!
Thanks 4 the tip!
#warrior
Will switch it out tomorrow and report back tomorrow. At the time that is all the line I had in the shop!
Thanks 4 the tip!
#warrior
