Dumredneck
Newbie
I am looking to replace my primary clutch on my 03 rx1.
Can I use a Vector clutch ?
Can I use the weights from an Apex in a clutch from a Vector or Rx-1 ?
Thanks for the help !
Can I use a Vector clutch ?
Can I use the weights from an Apex in a clutch from a Vector or Rx-1 ?
Thanks for the help !
thrasher
TY 4 Stroke Junkie
- Joined
- Nov 22, 2006
- Messages
- 708
- Reaction score
- 63
- Points
- 928
- Location
- Ottawa Valley, Ontario
- Country
- Canada
- Snowmobile
- 06 Vector RS ER
First, please complete your location information.
You can look up what you need in the TY Tech section for specifications for the sleds that you mention. I believe the basic primary and secondary clutches are the same, but weights, springs and helixes will be different between the 3 and 4 cylinders.
You can look up what you need in the TY Tech section for specifications for the sleds that you mention. I believe the basic primary and secondary clutches are the same, but weights, springs and helixes will be different between the 3 and 4 cylinders.
smokingcrater
Expert
Looking at the part numbers, there are some fairly major parts that are different... Sheaves are the same, spider is different... Doesn't mean it won't work, as long as the shaft diameter/taper is the same it can be made to work!
