Viper help

[Scooby]

Does anyone know is a 1 1/4 ripsaw track can be installed in a 02 Viper? The front hear exchanger has thick protection strips and the stock track seems to be very close to the strips.

 

[DYNAREX]

yep it will work-but you cant stud it without changing the drivers to 8 tooth

 

[POWERHAULIC]

Dynarex is correct :!:

 

[Pullinfront]

MisFit, the ripsaw will fit but I believe that you have to remove all tunnel and heatexhanger protection.

 

[Flipper]

There is some long discussion threads about this over at the Viper forum.

http://www.totallyamaha.net/forums/forumdisplay.php?f=4

If I recall correctly you need to switch to smaller drivers to stud.