snoman
Expert
any one out there water skipping if so post some pix or vids for this year
radianguy
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 1,925
- Location
- Corner Brook Newfoundland, Canada
- Country
- Canada
- Snowmobile
- 2009 Yamaha FX NYTRO XT Express
I said I wasn't going to but on my last ride of the season I just had to
little clip
http://s672.photobucket.com/albums/vv81 ... e09450.flv
another clip, hill doesn't look big but it was!!
http://www.flickr.com/photos/12739793@N07/3481658636/
little clip
http://s672.photobucket.com/albums/vv81 ... e09450.flv
another clip, hill doesn't look big but it was!!
http://www.flickr.com/photos/12739793@N07/3481658636/
Jeremy
Expert
Phazer's suck @$$ on the water, well mine does anyways !!!
Yamahammer485
TY 4 Stroke Guru
Nice buddy
Ill post mine once I get home from work in a few weeks. Theres a really good one that someone else took but I cant get the vid....
So far, all the phazers iv been on and run water beside me are good on water. Does yours have any mods that could affect it?
Ill post mine once I get home from work in a few weeks. Theres a really good one that someone else took but I cant get the vid....
So far, all the phazers iv been on and run water beside me are good on water. Does yours have any mods that could affect it?
OST
Expert
Nice clips radianguy.
The xtx sounds great goin up the hill!
The xtx sounds great goin up the hill!
Jeremy
Expert
Yamahammer485 said:Nice buddy
Ill post mine once I get home from work in a few weeks. Theres a really good one that someone else took but I cant get the vid....
So far, all the phazers iv been on and run water beside me are good on water. Does yours have any mods that could affect it?
Eventually somehow water finds its way to the clutches and zings me out. I do have a clutch kit, air box pods, dual pipes, nothing that I think would affect it's ability to skip.
snoman
Expert
http://www.youtube.com/watch?v=VUYsyBwsooo here's a vid of killer beasts water skipping
Yamahammer485
TY 4 Stroke Guru
Jeremy said:Yamahammer485 said:Nice buddy
Ill post mine once I get home from work in a few weeks. Theres a really good one that someone else took but I cant get the vid....
So far, all the phazers iv been on and run water beside me are good on water. Does yours have any mods that could affect it?
Eventually somehow water finds its way to the clutches and zings me out. I do have a clutch kit, air box pods, dual pipes, nothing that I think would affect it's ability to skip.
I have been fighting belt slip for 2 years straight, tried everything, tape, aluminum plates, etc and finally figured out that water somehow was coming in from behind the primary. It was being forced in by the track as id be doing huge wheelies 5 ft off the ground and have belt slip. I ended up making a plate behind the primary (remove it first, take your time) and I can now run water better than any other sled iv seen so far! No more problems, tons of power and traction!
Ill post pics of my plate mod once I have access to my computer
yamiboost
Lifetime Member
- Joined
- Feb 17, 2008
- Messages
- 459
- Location
- Labrador,
- Country
- Canada
- Snowmobile
- 15 SR Viper MTX Hurricane 300hp kit
Fx Nytro Drag Sled 25psi + Boss Nos
Yamahammer485 said:Jeremy said:Yamahammer485 said:Nice buddy
Ill post mine once I get home from work in a few weeks. Theres a really good one that someone else took but I cant get the vid....
So far, all the phazers iv been on and run water beside me are good on water. Does yours have any mods that could affect it?
Eventually somehow water finds its way to the clutches and zings me out. I do have a clutch kit, air box pods, dual pipes, nothing that I think would affect it's ability to skip.
I have been fighting belt slip for 2 years straight, tried everything, tape, aluminum plates, etc and finally figured out that water somehow was coming in from behind the primary. It was being forced in by the track as id be doing huge wheelies 5 ft off the ground and have belt slip. I ended up making a plate behind the primary (remove it first, take your time) and I can now run water better than any other sled iv seen so far! No more problems, tons of power and traction!
Ill post pics of my plate mod once I have access to my computer
Yes i would like to see what you have done i have a lot of belt slip on water with my attak.
Jeremy
Expert
Yamahammer, I also would like to see what you have come up with. Everyone needs to skip in the summer or you better sell your sled cause they are for summer as-well as winter !!! I tried to seal her up a little there today so I'll be trying her out today or tommorow !!! I'll link you to youtube when I try !!!
Jeremy
Expert
YAMAHAMMER485
Were you able to get to your comp. yet ??? I am interested in that plate you fabbed ??? Although I seem to have fixed my slippage issue I am still interested in that plate ???
Were you able to get to your comp. yet ??? I am interested in that plate you fabbed ??? Although I seem to have fixed my slippage issue I am still interested in that plate ???
rancidjo
Expert
Jeremy
Expert
Fixed my water issue !!!
Well I did some tweaking to the phazer and I had to try her out !!!
http://www.youtube.com/watch?v=XXP1Rx-yGg8
There are a few more if you just look around on my youtube !!!!
Well I did some tweaking to the phazer and I had to try her out !!!
http://www.youtube.com/watch?v=XXP1Rx-yGg8
There are a few more if you just look around on my youtube !!!!
Yamahammer485
TY 4 Stroke Guru
Pics are coming, finally got the net again, lol!
Similar threads
- Replies
- 10
- Views
- 1K
- Replies
- 2
- Views
- 2K
- Replies
- 5
- Views
- 1K
- Replies
- 3
- Views
- 315
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.