What's Out There for Aftermarket Exhaust Systems?

Len Todd

TY 4 Stroke God
Joined
Jan 14, 2006
Messages
2,281
Reaction score
6
Points
626
Location
Baldwin, Michigan
I have not been watching very closely and a search turned up little current info. Even googled it and came up with little info. So, ... What is out there for aftermarket exhausts for the early (pre-05) RX-1s? Would not like a lot more noise though.

FYI:

The '04's exhaust system snapped off at the crossover. Had to really peal back the joints to even get it off the Y-Pipes. Would like to replace it. But, ... Maybe, I'll just weld the thing back together and straighten out the joints, etc.. But, I though I would see what is out there first.

By the way, the Y-Pipes were still good and the Exhaust donuts were still good. But the joints in front of the cross-over pipe were like they were welded. Flex pipes are still good too. Looks like the pipes needed to flex, but the joints got to stiff resulting in the cross-over cracking off the pipes back to the muffler. ???
 
theres a few that I can think of:

excell (single exhaust)
white knuckle
mbrp
bender
snostuff rumblepack
hauck
 
Or make your own under tunnel exhaust, or fab any type of sport bike can to the under tunnel.
 
mbarclay said:
theres a few that I can think of:

excell (single exhaust)
white knuckle
mbrp
bender
snostuff rumblepack
hauck

All of those mentioned are quite a bit louder than stock. I have the Bender on my RX-1 and it's really raspy but I'm deaf anyway so it doesn't really bother me......... LaLaLa

Of the bunch Excell might be the best but it's still louder. I have the race version of Excell on my 06 Nytro and it's quite a bit louder than what I wanted.............but I got a deal on it.
 


Back
Top