I'm looking at getting a new track currently running 151 1.25 inch predator 2.52 pitch. Looking at new Crossover 1.5 inch, Challenger 2 inch, Finger 2 inch all Camoplast. Anyone use any of these tracks. I ride 50/50 trail off trail. I would like to stay with 2.52 pitch as I have a slightly used set of drivers I'll be putting on at the same time. Any input of these or other tracks would be appreciated.
Powder Nomad
Veteran
Not one which you listed, but
the polaris series iv track is pretty good. Not fully sure if they have it in a 151 (think they do), otherwise I'd say the challenger.
the polaris series iv track is pretty good. Not fully sure if they have it in a 151 (think they do), otherwise I'd say the challenger.
ViperTurboPete
TY 4 Stroke Master
- Joined
- Mar 25, 2005
- Messages
- 1,068
- Reaction score
- 22
- Points
- 993
- Location
- Sudbury, Ontario
- Country
- Canada
- Snowmobile
- 2015 Viper XTX LE MPI Turbo
2022 Expedition Extreme 850
I am running the stock 2" Challenger with no problem doing 50/50. You will notice the sled a little slower coming from a 1.25.
yamrx1
Expert
I have went with the crossover 9004c with no complaints not even hyfax wear ,would recomend extravert and fully clip,this track has the bight ,very aggresive.I ride mostly trail ,75% most of the time.. 
Thanks for the replies. I'm leaning towards the crossover but I see my buddies running 2 inch tracks floating through the powder. But I also see and smell thier hyfax wear when riding in low snow conditions.
