Who's running the RB3 with 3 BAR sensor

[spooled]

any one out there running a 3 bar map say 18+ lbs,

 

[TurboKeith]

Most of us are running 3-bar map sensors. I need bigger injectors to run it up to 18 psi. Powderlites may have a map made for this.

 

[rxrider]

X2

The 2 BAR MAP sensor is only good up to 15 lbs. If you want to run higher boost you need the 3 BAR MAP sensor, good up to 30 lbs. I would recommend running the 3 BAR MAP sensor, then you have the opportunity to run any boost you like up to 30 lbs.

 

[Lococoin]

What make of 3 bar map sensor are you guys running?

 

[rxrider]

whalbro??? if I remember it right, get it from Powder Lites, they have it in stock.
www.powderlites.com

 

[spooled]

i am running a gm 3 bar sensor, mapped to 20 lbs, with a 1:1 reg set at 38 lbs, but with custom injectors. elevation sea level to 3000. 50 50 fuel.

 

[mulot30th]

I will