xd16 a/f

[Blue shadow]

Last year at idle it read 13.5 a/f when I put it away . I just started it up and now its reading 5.5 a/f at idle .Did a free air calibration and still the same.I just replace the o2 sensor with a new one and still the same reading 5.5 a/f at idle.What could be wrong ?thanks

 

[mtdream]

what is it reading @ 20% throttle and 50% and WOT?

 

[FLYBYU]

It lost it's program. You need to plug it back in to computer and set it to the right fuel. It's not reading gasoline.

 

[big_red1a]

It can read afr or lamda you have to set it to afr

 

[Blue shadow]

Thanks I will try that.

 

[Blue shadow]

will I have it up on the computer but I cant find were it says to change to gasoline.On top it says info,input,min.hole,max.hole,alarm,and colours.Down on the bottom it says update firmware. what to do from there?thanks

 

[Blue shadow]

Do you have to hook up the Lc-1 with the XD-16 on the computer to change to gasoline?I was trying only with the XD-16 gauge

 

[Blue shadow]

ALL FIX ,had to program the LC-1 OVER not the XD -16