yamagone
Pro
- Joined
- Dec 17, 2008
- Messages
- 188
- Reaction score
- 50
- Points
- 733
- Location
- Essex, Ont. Canada.
- Country
- Canada
- Snowmobile
- 18' Sidewinder
- LOCATION
- Ontario
Guys I went back a few pages and didn't see a similar question so here is mine....
Time to replace the track on my 09' XTX. I have been a stud guy for over 20 years. I want to go to a 1.50 lug track and run it studless to see if where and how I ride agrees with the capability of the track (long distances, agressive and high speeds in and out of corners, on and off throttle very hard) If I don't like it I have the option to stud unlike the 1.75 option. Camoplast shows on their site three choices of the 1.50 lug.
1. Intence
2. Crossover
3. Rip Saw
Who has on trial reports of any of these boots based on how I decribed I ride. Thanks as always.
Coop.
Time to replace the track on my 09' XTX. I have been a stud guy for over 20 years. I want to go to a 1.50 lug track and run it studless to see if where and how I ride agrees with the capability of the track (long distances, agressive and high speeds in and out of corners, on and off throttle very hard) If I don't like it I have the option to stud unlike the 1.75 option. Camoplast shows on their site three choices of the 1.50 lug.
1. Intence
2. Crossover
3. Rip Saw
Who has on trial reports of any of these boots based on how I decribed I ride. Thanks as always.
Coop.