Search results

are you running 121" or longer. I wanted to stretch mine to 128" and put extrovert drivers on what track is the best, I live 200 south of you but do most riding at Duck Mountain , haVE RIPSAW now but they seem to stretch how do you like the cobra? I guess i will take her up to 135 -140 and i...

if you had the crank done at Falicon, with the 10;1 JE's and the knife rods, its identical to my setup, I am very happy with it especially the fact that it does not use a drop of oil! I think its a pretty bullet proof setup. I had 2K powersports in Minneapolis do it , the bill was $3150. US

Skydog How about 0-70 I'll race you. spin a catass and beat you back to the start line. that is a beautiful craft I must say! What nite do you go to Speed freaks anonymys meeting. maybe we could get help together

I chose JE 10-1's . they have been good absolutely no oil consumption

making these go faster! maybe stage 2, goes good at stage 1 , it'll eat an RXP doo

the bearing is tapered to fit the collar and it will come out the secondary side,take off the snap ring the nut on the inside pound out the collar and bearing from the inside its hard cause there isnt much room, its easier if you have the chaincase apart and the top sprocket off then just pound...

your picture didn't come up the first go around, now that I look at it I think you need to take it apart...........

that is a tapered bearing and collar, I made a tool to tighten that nut however I use it with the tool I made to hold the shaft which fits over the shaft on the chaincase side actually I use it with the brake rotor, so you'll have to hold it on the clutch side,find something that match the...

Ya I made appt. at Mayo in Rochester jun 4th for my bi-annual overhaul that I'm 2 years behind on, they have an exec program that you can go in and see all the specialists you need to see in a day and a half, they are very thorough and give you the results the same day! wonder if they have a...

Wow that is a long post! as for the performance part of it I really don't care I bought it to keep the fuel fresh and eliminate problems next fall. I'm a Deere dealer and the stabil stuff we sell isn't worth pouring in, the fuel still goes bad. this gets us to the other question leave fuel in...

I bought some of these and threw them in the tank being its almost put her away time. has anyone used these in the past , riding yesterday with them in for a week it ran real strong as these are suppossed to help with performance but as a rule I am not a believer in snake oil remedies! mostly...

my stage 1 RX-1 at 10psi wasn't so bad on fuel about 10, but stage 2 on the Apex 14psi is more like 7 or 8 mpg so 20 to 30% more fuel.... :drink: :drink:

sounds like to much power?

blgs-rx- if you are cutting out when you land hard i bent my floats so they lower when I had my RX-1 then it quit flooding when you landed hard,mine would sometimes stall but this fixed it.

had same problem 3 yrs ago on RX-1, you detonated it , the pistons are likely not round any more. I found out the hard way race gas is cheap if your running a stock engine. it needs to be taken apart, good luck....

glad to hear your ok , your information is a very important part of this forum, as a fellow supercharger guy now you'll feel so good now that the big pulley will have to go on bottom......take care

may sound dumb but I had the same stumbling problem at midrange, so I put in new spark plugs and it fixed it , I was looking for evrything else vacuum leaks ,settings etc. spent hours dinking with it 20 bucks and 15 minutes was all it was!

have you drilled the holes in the nose cone? but you are right the tank is hot and the cooler is hardly warm on mine also, this doesn't seem right ??

I guess I have a Team secondary , so I used their alignment bar and aligned it parallel , spec should be less than .060 difference between front and back of the fixed side of the primary ,I got mine to .019 by adjusting the three motor mount threaded bushings, mind you this is on an apex . I...

JE 10:1's and their rings 500 miles never used a drop. using 60/40 110/91 , plugs like young brazilian girls tan , 07 apex 15psi MPI